Indoor Helicopter with Auto Stabilizing Technology - The Easy 4#6S Fixed Pitch Helicopter We all know that the Fixed Pitch Helicopter is better for beginners because of easier setup and less complicated parts than the Collective Pitch Helis, now the 4#6S has gone one step further, it has a 3-Axis gyro to help you to stabilize the helicopter, just like adding a Co-Pilot next to you, the helicopter body has never been this stable.

What is 3-Axis Gyro?

3-Axis Gyro means it can sense X, Y and Z axis moments, that means body leaning forward / backward, body rolling left / right, tail drifting CW / CWW, it will constantly monitoring any off-balance in all directions, then it will give signals to all CCPM servos and Rudder servo to balance the helicopter, it works constantly and unless you have the helicopter drifts to much, you will not even notice the system exists, please take a look at the following picture.

3-Axis Gyro and Rudder Servo means good!
Tail rotor is used to generate wind to counter act the main rotor rotation. Precise of tail rotor wind is needed to keep the helicopter heading one direction. We usually have two ways in generating the precise of wind from the tail rotor, one is the Tail Motor, another one is sharing the power from the Main Motor by a tail drive shaft. Tail Motor is usually slower, it can't keep up the main motor's speed and causing the tail to drift while heli is going up and going down, usually low price model and small scale helis use a tail motor. The best solution is to have a Gyro and Rudder Servo. By changing the Tail Rotor blade pitch, you can adjust the amount of wind generating to keep the heli in one heading, to do this, you need a good performance gyro constantly monitoring the heli heading and give correction to rudder servo, then it will push the tail rotor pitch. You will not imagine how quick it worked during the flight, but it is the heart and soul for any RC helicopter.

100% Pre-Assembled, It's 100% assembled, you can have it flying in just a few minutes out of the box. Just a quick charge of the battery and you are ready for lift off!
Slightly longer than your palm, perfect for Indoor Flight
Fixed Pitched Helicopter, proven to be the best choice after a Co-Axial Helicopter
Fixed Pitch means very stable, low price maintenance and easy repairing. A Gyro and Rudder Servo means you get much better head holding performance than a tail motor.
The new WK2402 Digital Transmitter

Thanks for the success of the top of the line WK2801 transmitter, Walkera used the same appearance and make the new WK2402 4 Channel LCD display, 2.4Ghz Digital Transmitter. No need to flick switches at the back, no need to guess which button is for which purpose, by using the new WK2402 transmitter, you can simply adjust the channel trimmings, servo directions or throttle modes from the LCD display, it's easy, isn't it?

This package includes :

1. 4-Ch 2.4G WK2402 Digital Transmitter
2. Pre-assembled Helicopter
3. Battery Charger
( Suitable for your country )
4. 3.7V 600mAh Li-Po Battery
5. 1 Pair of Main Blades
6. Adjustment Tool and Spare Gears
7. Instruction Manual
8. Extra 1 Pair of Main Blades
9. Extra 1 Pair of Paddles
10. Extra 1 Set of Gears

1. RadioControlToys.ca Sends You Everything!

Do you know? Some online sellers on the market keep some items to make more profit such as remote controller, Li-Po battery, battery charger or somethings you can't imagine..... Any of our RTR(Ready to Roll) or RTF(Ready to Fly) packages come with everything needed, even the AA batteries for your controllers. Now thats something you wont find anywhere else.